欢迎光临~上海建梦机电科技有限公司 语言选择: 中文简体 ∷  中文繁体
服务热线 全国服务热线:

86 021 33637517

首 页 > 产品展示 > 美国自动化在线检测系统Automatic online measuring systems
  • 美国自动化在线检测系统Automatic online measuring systems
美国自动化在线检测系统Automatic online measuring systems

美国自动化在线检测系统Automatic online measuring systems

自动化在线检测系统

Automatic online measuring systems

METRO A-M

自动化在线检测系统主要依托图像釆集器以及三维扫描仪等硬件快速釆集物件数 据,然后利用软件的分析和对比功能,快速获取比对的检测数据,以完成一个物件的 检测。主要优势在于在线,快速,自动化,高精度,批量完成产品的检测。

The automatic online measuring systems mainly use non-contact sensors to capture 3D innages or point cloud of a part on the production line. The online measurement is embedded in the production process without the part being taken away from production line and the measurement is seamless in production. Another primary advantage of online measurement is defect-prediction and defect-correction which greatly helps fully automated, rapid, cost-effective mass production. 

主要特点:Major Characteristics

■大批量产品,流水线,批量,精度又要求,可以现场配合三坐标等实验室仪器

Particularly suit mass production and production lines of high accuracy parts.

类别Type

自动化在线检测系统Online measurement

三坐标测量机 CMM measurement

环境要求Environment

现场On site

实验室 In laboratory

精度 Accuracy

0.01-0.1 mm

0.002-0.006mm

效率 Efficiency

可以做到批量快速检测,每个件 0.5-5分钟左右

Batch measurement, 0.5-5 minutes per part.

单个抽检检测30-60分钟左右 Typically 30-60 minutes per part

自动化程度Automation level

基本全程自动化 Almost fully atomized

需要人工操作辅助 People operation is involved

检测数量方式Quantity

全检 All parts are measured

扌由检 Samples are measured

结果 Results

可修正 Correctable defect

报废Waste

 

As you can see from the above table, A CMM can be used in conjunction with online measuring system for critical parts.

Scan the qr code Close
the qr code
Link 岗亭 沪ICP备2022000899号-1 铅封 扩孔机 数控外圆磨床 燃气蒸汽发生器 温州公司注册